LED Driver

Our DMX LED drivers enable the control of fixtures, strips and effects with the DIN and ANSI standardized very fast DMX512 control signal. We offer a wide range of DMX LED drivers, both for current and voltage controlled LED applications. The devices differ in the number and load capacity of the outputs, in the supply voltage and in the housing design.

 

The data sheets for the devices can be found on the page Downloads.

 

Voltage LED Driver

for voltage controlled LED devices, either in compact metal housing for direct installation in devices or as DIN35mm rail housing for installation in distribution boards

 

Type outputs output load power supply housing specials
PX342 1 10A 12-24V DIN T-35 Micro-Switch, RDM
PX254 3 6A 7-24V Metal Menu-Functions, RDM
PX282 3 6A 12-24V DIN T-35 Menu-Functions, RDM
PX370 4 5A 7-24V Metal Menu-Functions, RDM
PX178 6 7.5A 12-24V DIN T-35 LCD-Menu-Functions
PX163+ 48 700mA 12-24V Metal  
Current LED drivers

for current controlled LED devices, either in compact metal housing for direct installation in devices or as DIN35mm rail housing for installation in distribution boards

 

Type outputs output load power supply housing specials
PX789* 1 2,3A 24-60V Metal lokal, RDM
PX319 1 2A 12-48V Metal Mikro-Switch, with preselection
PX319-HV 1 1,5A 12-60V Metal Micro-Switch, with preselection
PX745 3 350mA 12-48V Metal Menu-Functions, RDM
PX780 3 350mA 12-48V DIN T-35 Menu-Functions, RDM
PX746 3 700mA 12-48V Metal Menu-Functions, RDM
PX781 3 700mA 12-48V DIN T-35 Menu-Functions, RDM
PX714 4 350mA 12-48V Metal Menu-Functions, RDM
PX783 4 700mA 12-48V DIN T-35 Menu-Functions, RDM
PX782 4 350mA 12-48V DIN T-35 Menu-Functions, RDM
PX715 4 700mA 12-48V Metal Menu-Functions, RDM
PX268+ 12 350mA 12V DIN T-35 Micro-Switch
PX763 36 350mA 12V Metal Menu-Functions, RDM
PX763-24 36 345mA 12-24V Metal Menu-Function, RDM
PX863 36 350mA 12V Metal Menu-Functions, RDM

*This driver enables PWM-free dimming of LED devices.

 

There are drivers that have an intuitive menu that allows the installer to set the parameters for the entire device or individually for each channel. It is possible to set a DMX address, the operating mode, the behavior on DMX signal loss, the frequency of an output and the power limits. The three- and four-channel drivers have a special operating mode: dynamic white. This allows to optimally control the transition from cool white to warm white for appropriate LED lamps. Most drivers support the DMX/RDM protocol. With this, device parameters can be read and set remotely via the DMX line. The PX178 driver is equipped with a color display and a USB port for upgrading firmware. These models are extended in function and have a real-time and an astronomical clock. There is also a special driver PX713 for controlling digital LED strips. With this it is possible to control each pixel independently of each other. The device works with three types of strips: WS2811, WS2812B and WS2813.

Housing

  • Plastic housing for DIN35 rail, for use in switchgear (DIN T-35)
  • Metal housing for integration in devices and installations (metal)

(For dimensions please refer to the corresponding Datasheet)

PXM Trade GmbH | Rennemattenweg 13 | DE-79576 Weil am Rhein | +49 7621 916 60 90 | info@pxmtrade.com