Dimmer for 4 DMX circuits to control all types of loads with low power of 200VA each. Control via DMX512 or via 4 analog inputs 0..+10VDC.

Digital dimmer for fixed installations. Depending on the model, the module controls four or two independent circuits, each of which can be loaded with 600W or 1200W.

The AC dimmer 12 x 10 AC can be single-phase or three-phase. The dimmer can control 12 independent circuits with a power of 2.3kW each. The electronics allows any addressing of each circuit and offers other options of selection to limit the output voltage, preheating of lamps and setting each circuit in case of DMX signal failure.

PX814 is a professional dimmer with 24 built-in outputs of 2400 W or 3600 W each. The device has a color touch screen, four buttons and a controller that allows to navigate through an intuitive menu, set all parameters of the dimmer and view its status. Software is available for the device, which can be downloaded from the manufacturer's website.

Amplifier and splitter. Allows the connection of another 32 receivers and the extension of the DMX line. Two optically separated outputs, so it can also be used as a distributor. The device is manufactured in two types of housing: Metal with XLR 3pin or 5pin connectors or hermetically sealed and equipped with cable glands as IP65 also for outdoor installation.